Performance Analysis of (Bi2Te3-PbTe) Hybrid Thermoelectric Generator
Abstract
The performance of (Bi2Te3-PbTe) hybrid thermoelectric generator (TEG) composed of n-type Bismuth Telluride and p-type Lead Telluride semiconductor materials is presented in this paper. The effect of different performance parameters such as output voltage, output current, output power, maximum power output, open circuit voltage, Seebeck co-efficient, electrical resistance, thermal conductance, figure of merit, efficiency, heat absorbed and heat removed based on maximum conversion and power efficiency have been theoretically analyzed by varying the hot side temperature of the hybrid thermoelectric generator up to 350oC and by varying the cold side temperature from 30oC to 150oC. The results showed that a maximum power output of 21.7 W has been obtained with the use of one hybrid thermoelectric module for a temperature difference of 320oC between the hot and cold side of the thermoelectric generator at matched load resistance. The figure of merit was found to be around 1.28 which makes its usage possible in the intermediate temperature (250oC to 350oC) applications such as heating of Biomass waste, heat from Biomass cook stoves or waste heat recovery etc. It is also observed that the hybrid thermoelectric generator offers superior performance over 250oC of the hot side temperature, compared to standard Bi2Te3 modules.
Full Text:
PDFDOI: http://doi.org/10.11591/ijaas.v5.i1.pp32-44
Refbacks
- There are currently no refbacks.
International Journal of Advances in Applied Sciences (IJAAS)
p-ISSN 2252-8814, e-ISSN 2722-2594
This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.