IJAAS Scondary document in Scopus

International Journal of Advances in Applied Sciences (IJAAS)
Scondary document in Scopus: 72 Document
Source: Scopus (Export Date: 14 April 2021)


Scopus
EXPORT DATE:14 Apr 2021

Senthilkumar, S., Brindha, K., Bhandari, S.
Vehicle accident management and control system using mqtt
(2020) International Journal of Advances in Applied Sciences (IJAAS), 9 (1), pp. 1-11. Cited 1 time.

Bhukya, R. K., Kumar, P. S.
Simplified down sampling factor based modified SVPWM technique for cascaded inverter fed induction motor drive
(2020) International Journal of Advances in Applied Sciences, 9 (1), p. pp20. Cited 1 time.

Olaniyi, O., Daniya, E., Kolo, J., Bala, J., Olanrewaju, A.
A computer vision-based weed control system for low-land rice precision farming
(2020) International Journal of Advances in Applied Sciences (IJAAS), 9 (1), pp. 51-61. Cited 1 time.

Kavitha, M.G., Vinoth Kumar, K., Jayasankar, T.
Trilateration based localization method using mobile anchor in wireless sensor networks
(2020) International Journal of Advances in Applied Sciences, 9 (1), pp. 34-42. Cited 2 times.

Akinwole, OO
Design, simulation and implementation of an Arduino microcontroller based automatic water level controller with I2C LCD display
(2020) International Journal of Advances in Applied Sciences, 9 (2), pp. 77-84. Cited 1 time.

Isha, M., Shirbhate, S., Barve, Sunita
Solar panel monitoring and energy prediction for smart solar system
(2019) International Journal of Advances in Applied Sciences (IJAAS), 8 (2), pp. 136-142. Cited 2 times.

Pavithra, P., Sriram, A., Kalimuthu, K.
Compact planar ultrawideband MIMO antenna for wireless applications
(2019) International Journal of Advances in Applied Sciences, 8 (3), pp. 243-250. Cited 1 time.

Abdel-Qawee, I. M.
Comparative study of the most efficient maximum power point tracking techniques for a photovoltaic system
(2019) International Journal of Advances in Applied Sciences (IJAAS), 8 (1), pp. 73-82. Cited 1 time.

Lenin, K.
Real Power Loss Reduction by Dolphin Swarm Algorithm
(2019) International Journal of Advances in Applied Sciences, 8 (4), pp. 285-289. Cited 1 time.

Rashid, F.L., Hadi, A., Abid, A.A., Hashim, A.
Solar energy storage and release application of water-phase change material-(SnO2-TaC) and (SnO2-SiC) nanoparticles system
(2019) International Journal of Advances in Applied Sciences, 8 (2), pp. 154-156. Cited 5 times.

Idir, A., Ahriche, A., Khettab, K., Bensafia, Y., Kidouche, M.
Real time simulation of sensorless control based on back-EMF of PMSM on RT-Lab/ARTEMIS real-time digital simulator
(2019) International Journal of Advances in Applied Sciences, 8. Cited 2 times.

Rosaiah, K., Rao, G.S., Sivakumar, D.C.U., Kalyani, K.
The odd generalized exponential log logistic distribution: A new acceptance sampling plans based on percentiles
(2019) International Journal of Advances in Applied Sciences, 8 (3), pp. 176-183. Cited 1 time.

Devkota, J. U.
Statistical analysis of night radiance RH using VIIRS day/night band satellite time series data
(2019) International Journal of Advances in Applied Sciences (IJAAS), 8 (1), pp. 26-33. Cited 1 time.

Bhandari, R., Jadhav, S.
Spectral efficient blind channel estimation technique for mimo-ofdm communications
(2018) International Journal of Advances in Applied Sciences (IJAAS), 7 (3), pp. 286-297. Cited 1 time.

Plant, M. H. P.
Recycling of Industrial Waste Water for the Generation of Electricity by Regulating the Flow Control Sensor using IoT
(2018) International Journal of Advances in Applied Sciences, 7 (4), pp. 347-352. Cited 1 time.

Gupta, G.
Cost Allocation of Reactive Power Using Matrix Methodology in Transmission Network
(2018) International Journal of Advances in Applied Sciences (IJAAS), 7 (3), pp. 226-232. Cited 1 time.

Rao, N., Reddy, B.R.J.I.J.O.R.
(2018) International Journal of Advances in Applied Sciences, 5, pp. 174-179. Cited 1 time.

Prabhu, K.B., Ganapathy, S.
Data mining techniques for providing network security through intrusion detection systems: A survey
(2018) International Journal of Advances in Applied Science, 7 (1). Cited 1 time.

Kondisetty, D.P., Hussain, M.A.
SLIC Superpixel Based Self Organizing Maps Algorithm for Segmentation of Microarray Images
(2018) International Journal of Advances in Applied Sciences(Ijaas), 7 (1), pp. 78-85. Cited 1 time.

Borkar, S., Bonde, S.V.
A fusion based visibility enhancement of single underwater hazy image
(2018) International Journal of Advances in Applied Sciences (IJAAS), 7, pp. 38-45. Cited 1 time.

Yaseen, M., Farooq, U.
Requirement elicitation model (rem) in the context of global software development
(2018) International Journal of Advances in Applied Sciences, 7 (3), p. 303. Cited 1 time.

Jena, P.M., Nayak, S.R.
Angular Symmetric Axis Constellation Model for Off-line Odia Handwritten Characters Recognition
(2018) International Journal of Advances in Applied Sciences (IJAAS), 7 (3), pp. 265-272. Cited 1 time.

Sankar, Sankar, S., Srinivasan, P.
Energy and load aware routing protocol for internet of things
(2018) International Journal of Advances in Applied Sciences (IJAAS), 7 (3), pp. 255-264. Cited 6 times.

Gopi, P., Reddy, P.L.
Design of robust load frequency controller for multi-area interconnected power system using sdo software
(2017) International Journal of Advances in Applied Sciences (IJAAS), 6 (1), pp. 13-23. Cited 1 time.

Deepa, S.
A Fuzzy GA Based STATCOM for Power Quality Improvement
(2017) International Journal of Advances in Applied Sciences (IJAAS), 6 (3), pp. 235-243. Cited 1 time.

Sheikh, A., Khotanlou, H.
Writer identity recognition and confirmation using persian handwritten texts
(2017) International Journal of Advances in Applied Sciences, 6 (2), pp. 98-105. Cited 1 time.

Maniar, S., Shah, J.S.
Classification of Content Based Medical Image Retrieval Using Texture and Shape Feature with Neural Network
(2017) International Journal of Advances in Applied Sciences, 6 (4), pp. 368-374. Cited 2 times.

Divya, C., Janarthanan, B., Chandrasekaran, J.
Review on Recent Advances in Titanium Dye Oxide Nanoparticles for Dye Sensitized Solar Cell Applications
(2017) International Journal of Advances in Applied Sciences (IJAAS), 6 (2), pp. 126-135. Cited 1 time.

Kumar, R., Deepika, G., Krishnan, M., Karthikeyan, B.
An Open Source Contact-Free Palm Vein Recognition System
(2017) International Journal of Advances in Applied Sciences, 6 (4). Cited 3 times.

Duth, P.S., Viswanath, V., Sreekumar, P.
Brain image segmentation using level set: An hybrid approach
(2017) International Journal of Advances in Applied Sciences, 6 (3), pp. 267-276. Cited 1 time.

Annapurna, H.S., Siddappa, M.
MTKD: An algorithm for multi-tier key distribution for securing group communication in WSN
(2017) International Journal of Advances in Applied Sciences (IJAAS), 6 (1), pp. 23-31. Cited 1 time.

Angelinejayakumar, A.
Performance Analysis of (Bi2Te3-PbTe) Hybrid Thermoelectric Generator
(2016) International Journal of Advances in Applied Sciences, 5 (1), pp. 32-44. Cited 1 time.

Dixit, C.M., Dhamal, S.S., Kushare, B.E.
Advantages of Z source inverter or high source impedance inverter over traditional inverters
(2016) International Journal of Advances in Applied Science and Engineering (IJAEAS), 3 (3), pp. 71-75. Cited 1 time.

Ajeeth Kumar, S, Shabarish, G, Kishore Kannan, A
IoT Based Wind/Solar Hybird Inverter
(2016) International Journal of Advances in Applied Sciences (IJAAS), 5 (3), pp. 137-140. Cited 2 times.

Bhandralia, A.
Polyhouse agricultural marketing system using big data hadoop
(2016) International Journal of Advances in Applied Sciences (IJAAS), 5, pp. 78-84. Cited 1 time.

Wang, C.
Assessment of BIM implementation among MEP firms in Nigeria
(2015) International Journal of Advances in Applied Sciences, 4 (3), pp. 73-81. Cited 3 times.

El-Damcese, M.A., Shama, M.S.
Reliability and availability analysis of a repairablesystem with two type of failure
(2015) International Journal of Advances in Applied Sciences, 4 (1), pp. 39-44. Cited 2 times.

Ramalingam, C., Balamurugannatarajan, S.P., Padmathilagam, V., Anandhi, T.S.
Design of A New Three Phase Hybrid H-bridge and H-Type FCMLI for Various PWM Strategies
(2015) International Journal of Advances in Applied Sciences, 4 (3). Cited 1 time.

Reddy, K.C.S., Rao, D.V.
High performance quaternary arithmetic logic unit on programmable logic device
(2015) International Journal of Advances in Applied Science and Engineering (IJAEAS), 2. Cited 1 time.

Hamad, A.J.
Lightweight concrete reinforced with polypropylene fibres
(2015) International Journal of Advances in Applied Sciences (IJAAS), 4 (2), pp. 45-49. Cited 4 times.

Naveenkumar, M.
Novel Design of Reversible MUX and DEMUX using GDI Technique
(2015) International Journal of Advances in Applied Sciences IJAAS, 4 (3), pp. 103-108. Cited 1 time.

Saurabh, R.M., Gaytri, U.T., Twinkle, D.B., Santosh, K.A.N.
Approach on enhance steganography using 3D image
(2014) International Journal of Advances in Applied Science and Engineering (IJAEAS), 1. Cited 1 time.

Afthanorhan, W.M.A.W.
Modeling the multiple indirect effect among latent constructs by using structural equation modeling: Volunteerism program
(2014) International Journal of Advances in Applied Sciences, 3 (1), pp. 25-32. Cited 2 times.

Eseosa, Omorogiuwa, Onohaebi, S. O.
Artificial neural network based economic generation scheduling in Nigeria power network
(2014) International Journal of Advances in Applied Sciences, 3 (4), pp. 206-214. Cited 1 time.

Ladhar Annepu, L.
Cut detection in remote versatile wireless sensor mobile networks
(2014) Institute of Advanced Engineering and Science (IAES), International Journal of Advances in Applied Sciences (IJAAS), 3 (4), pp. 202-205. Cited 1 time.

Sanjay, R., Vaishnav Raj, K.S.
Biological Treatment of Tannery Effluent
(2014) International Journal of Advances in Applied Science and Engineering (IJAEAS), 1 (1), pp. 4-8. Cited 2 times.

Hussin, J.M., Rahman, I.A., Memon, A.H.
The way forward in sustainable construction: Issues and challenges
(2013) International Journal of Advances in Applied Sciences, 2 (1), pp. 15-24. Cited 76 times.

Kakar, J.
Propagation of Rayleigh waves in non-homogeneous orthotropic half space elastic media under the effect of magnetic field
(2013) International Journal of Advances in Applied Sciences, 2 (4), pp. 185-192. Cited 3 times.

Ucol-Ganiron, T.
Scrap waste tire as an additive in asphalt pavement for road construction
(2013) International Journal of Advances in Applied Sciences, 2 (1), pp. 33-40. Cited 2 times.

Bushra, R.M., Nahla, A.A., Ali, S.M., Khalid, A.H.
Design and Construction Optical Fiber Sensor System for Detection the Stress and Fine Motion
(2013) International Journal of Advances in Applied Sciences (IJAAS), 2 (2), pp. 59-66. Cited 1 time.

Shakir, A.A., Mohammed, A.A.
Manufacturing of bricks in the past, in the present and in the future: a state of the art review
(2013) International Journal of Advances in Applied Sciences, 2 (3), pp. 145-156. Cited 44 times.

Bahrami, M., Arzaghi, S., Sahraeyan, M.
Sedimentary Basin Analysis of Sachun Formation in Southwestern Iran: Implication for Sedimentary Environments and Tectonic Setting
(2013) International Journal of Advances in Applied Sciences, 2 (2), pp. 89-94. Cited 1 time.

New, M.T., Yu, S.S., Latt, Z.K.
Study on phosphate solubilization of salt tolerant soil yeast isolates and effects on maize germination and growth
(2013) International Journal of Advances in Applied Sciences, 2, pp. 157-164. Cited 1 time.

Ganiron, T.U., Jr., Martinez, D.T., Lacsamana, C.
Development of hardware interfacing system for visual C++
(2013) International Journal of Advances in Applied Sciences, 2 (4), pp. 1001-1005. Cited 1 time.

Baker, A.G.
Study of mechanical and physical properties for SiC/Al composites
(2013) International Journal of Advances in Applied Sciences, 2 (2), pp. 67-72. Cited 4 times.

Yap, C.K.
Can the Number of Correlation Coefficient (R Value) as a Statistical Indicator of Metal-Polluted Ecosystem? A Comparison between Polluted and Unpolluted Ecosystems
(2013) International Journal of Advances in Applied Sciences, 2 (4), pp. 209-216. Cited 1 time.

Manufacturing of Bricks in the Past, in the Present and in the Future: A state of the Art Review
(2013) International Journal of Advances in Applied Sciences (IJAAS), 2 (3), p. 145~156. Cited 1 time.

Ali, M.M.
Factors effect on the effective length in a double strap joint between steel plates and CFRP
(2012) International Journal of Advances in Applied Sciences, 1 (1), pp. 11-18. Cited 3 times.

Majundar, S., Nayak, S., Chakraverty, S.
Huzzy and interval finite element method for heat conduction problem
(2012) International Journal of Advances in Applied Sciences, 1 (4), pp. 171-180. Cited 1 time.

Nagapan, S., Rahman, I.A., Asmi, A.
Factors contributing to physical and non-physical waste generation in construction industry
(2012) International Journal of Advances in Applied Sciences, 1 (1), pp. 1-10. Cited 41 times.

Hussin, J.M., Rahman, I.A., Memon, A.H.
The Way Forward in Sustainable Construction: Issues and Challenges
(2012) International Journal of Advances in Applied Sciences (IJAAS), 1 (3), pp. 45-52. Cited 1 time.

Hesameddini, E., Riahi, M., Latifizadeh, H.
A Coupling Method of Homotopy Technique and Laplace Transform for Nonlinear Fractional Differential Equations
(2012) International Journal of Advances in Applied Science, 1 (4), pp. 159-179. Cited 1 time.

Ministry of, S., Technology, Abdullah, G.H., Mhdi, B.P.D.B., Aljaber, N.A.
Design Thin Film Narrow Bandpass Filters For Dense Wavelength Division Multiplexing
(2012) International Journal of Advances in Applied Sciences, 1 (2), pp. 65-70. Cited 4 times.

Mohammed, A.A., Shakir, A.A.
Evaluation the Performance of Al-wahdaa Project Drinking Water Treatment plant: A case Study in Iraq
(2012) International Journal of Advances in Applied Sciences, 1 (3), pp. 130-138. Cited 3 times.

Memon, A.H., Rahman, I.A., Azis, A.A.A.
Time and cost performance in construction projects in southern and central regions of peninsular Malaysia
(2012) International Journal of Advances in Applied Sciences, 1 (1), pp. 45-52. Cited 42 times.

Abdullah, L.
ARIMA Model for Gold Bullion Coin Selling Prices Forecasting
(2012) International Journal of Advances In Applied Sciences (IJAAS), 1 (4), pp. 153-158. Cited 24 times.

Musa, S.M., Sadiku, M.N.O.
Finite Element Analysis for Five Transmission Lines in Multilayer Dielectric Media
(2012) International Journal of Advances in Applied Sciences (IJAAS), 1 (4), pp. 181-190. Cited 3 times.

Piltan, F., Piran, M., Akbari, M., Barzegar, M.
Baseline Tuning Methodology Supervisory Sliding Mode Methodology: Applied to IC Engine
(2012) International Journal of Advances in Applied Sciences, 1 (3), pp. 116-124. Cited 3 times.

Yong, C.Y., Sudirman, R., Mahmood, N.H., Chew, K.M.
Distance: A Moderator Between Walking Activity and Pattern Classification
(2012) International Journal of Advances In Applied Sciences (IJAAS) Vol, 2, p. 1. Cited 1 time.

Mohammed, A.A.
Assessment the Mechanical Properties of Soil Cement Interlocking (SCI) Bricks: A Case Study in Malaysia
(2012) International Journal of Advances in Applied Sciences, 1 (2), pp. 77-84. Cited 5 times.

Yong, C.Y., Chew, K.M., Sudirman, R., Mahmood, N.H.
Distance: A Moderator Between Walking Activity and Pattern Classification
(2012) International Journal of Advances in Applied Sciences, 1 (2), pp. 85-90. Cited 1 time.

Tripathy, B.K., Panda, G.K., Kumaran, K.
A rough set based efficient l-diversity algorithm
(2011) International Journal of Advances in Applied Science Research, Pelagia Research Library, 2 (3), pp. 302-313. Cited 1 time.